manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

The MIMAKI JV33-260BS is a high-performance large format printer. Enhance your user experience and ensure optimal operation with the comprehensive Operation Manual available for free download on our website. Unleash the full potential of this extraordinary product by accessing the manual at manualshive.com.

Share
Download
background image

1-14

Media

Useable media sizes and notes for handling are described.

Usable sizes of media

Caution in handling of medias

Pay attention to the followings for handling of medias.

Model

JV33-260BS

Type of Recommended media

Tarpaulin/  FF(Flexible  Face)/
Weatherproof PVC

Photo paper/PET/Artificial paper/
Transfer paper

Maximum width

2642mm

Minimum width

210mm

Maximum printing width

2632mm

Ro

ll media

Thickness

1.0mm or less

Roll outside diameter

φ 

180mm or less

Roll weight

25kg or less

Roll inside diameter

3 or 2 inches

Side printed

Side facing outward

Roll end treatment

The roll end is gently fixed to the core with weak-adhesive tape or
weak glue for easy removal.

•

Use media recommended by MIMAKI to ensure reliable, high-quality printing.

Set the heater temperature to meet the characteristics of the media.

•

Set the temperature of the Pre-heater, Print heater and Post-heater according to the type and 
characteristics of the media used.

Automatic temperature setting can be made on the operation panel by setting the profile on the 
dedicated RIP. For setting on the RIP, refer to the instruction manual for your RIP.

•

Pay attention to the expansion and contraction of the media.

Do not use media immediately after unpacking. The media can be affected by the room temperature and 
humidity, and thus it may expand and contract.
The media have to be left in the atmosphere in which they are to be used for 30 minutes or more after 
unpacked.

•

Do not use curled media.

This may result in paper jamming.
If a regular-sized coated sheet of media is rolled and stored, the coated side has to face outside.

•

Be careful to dusts on the edge face of the medium.

Some rolls have dusts contained in the package gathered on the edge surface of the roll. If you use as it 
is, the drawing quality may be degraded due to nozzle missing or ink drops. Be sure to set the roll after 
removing dusts adhering on the edge face of the roll.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Related manuals for JV33-260BS

olympia electronics A-200 Manual preview
A-200
Brand: olympia electronics Pages: 4
Panasonic KX-MC6040 - Color Laser Multi-Function... Quick Reference Manual preview
KX-MC6040 - Color Laser Multi-Function...
Brand: Panasonic Pages: 24
Oki MICROLINE 720 Handbook preview
MICROLINE 720
Brand: Oki Pages: 120
TP-Link TL-PS110P Quick Installation Manual preview
TL-PS110P
Brand: TP-Link Pages: 16
Xante Accel a Writer 812 Manual preview
Accel a Writer 812
Brand: Xante Pages: 312
SII DPU-30 Technical Reference preview
DPU-30
Brand: SII Pages: 85
Canon iR7105 Easy Operation Manual preview
iR7105
Brand: Canon Pages: 60
Canon Pixma MP800R User Manual preview
Pixma MP800R
Brand: Canon Pages: 188
Canon IR3320i Copying Manual preview
IR3320i
Brand: Canon Pages: 230
Canon iR2422 series Service Manual preview
iR2422 series
Brand: Canon Pages: 308
Canon iR6020i Copying Manual preview
iR6020i
Brand: Canon Pages: 216
Canon iR2022 Easy Operation Manual preview
iR2022
Brand: Canon Pages: 17
3D Systems ProX DMP 200 User Manual preview
ProX DMP 200
Brand: 3D Systems Pages: 103
datamax-o'neli E-Class Mark III Operator'S Manual preview
E-Class Mark III
Brand: datamax-o'neli Pages: 58
ADITIVA 3D ENDER 3 BELT KIT Assembly Manual preview
ENDER 3 BELT KIT
Brand: ADITIVA 3D Pages: 43
Canon imagePROGRAF iPF680 Service Manual preview
imagePROGRAF iPF680
Brand: Canon Pages: 42
Canon imagePROGRAF iPF680 User Manual preview
imagePROGRAF iPF680
Brand: Canon Pages: 650
Sharp AR-FN5N Service Manual preview
AR-FN5N
Brand: Sharp Pages: 5

Brands by name

Popular brands

Load more brands