manualshive.com logo in svg

MIMAKI JV33-260BS, Operation Manual

Share
Download
MIMAKI JV33-260BS Operation Manual Download Page 159

5-21

1

2

3

4

5

Rou

tine Maintenan

ce

When Nozzle clogged after cleaning

When the nozzle clogging is not improved even after the head cleaning(

P.2-33) or the head nozzle washing

(

P.5-10), execute two functions as follows.

Filling up ink

1

Select [HD.MAINTENANCE] of the maintenance menu.

(1)

Press the 

 key in the local mode.

(2)

Select [MAINTENANCE] by pressing the 

 keys then press the 

 key.

(3)

Select [HD.MAINTENANCE] by pressing the 

 keys.

(4)

Press the 

 key.

2

Press the 

 key.

• Ink filling is automatically started.

• It returns to the display on the right when the ink filling is completed.

3

Press the 

 key several times to end.

When 600cc cartridge is used

Q

Even when [Ink Level] is displayed, enough ink for head cleaning may remain in the ink pack.

When [Ink Level] appears, see "When [Ink Level] is displayed" in the provided manual "When using 
600 cc cartridge" and enter the current weight of  the 600cc cartridge.

Q

When the remaining ink is not enough for head cleaning

When the remaining ink is not enough for head cleaning, an error 
shown on the right appears on the step 3. Replace with a new ink 
pack, and then perform head cleaning again.

FILL UP INK

• Supplies ink to correct nozzle clogging.

DISCHARGE&WASH

• Washes the heads, dampers and ink tubes cleaning solution cartridge 

(option). (

P.5-22)

F I L L I NG UP

0 0 : 0 0

HD . MA I NT ENANCE

F I L L UP I NK

< e n t >

* * * 6 0 0 c c E r r o r

* * *

s h o r t a g e o f

i n k .

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV33-260BS









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands