MIMAKI JV3-130 SP II, Operation Manual, Page: 30 / 144

- 1.12 -
Precautions in handling the media
Carefully observe the following when handling the media.
• Use media recommended by MIMAKI for stable, high-quality plotting.
• Heater temperature setting according to media characteristics
Set the temperature of the preheater and print heater according to the type
and characteristic of the media used. Automatic temperature setting can be
made from the operation panel through profile specification from the dedi-
cated RIP.
• Expansion and contraction of the media
Do not use media immediately after unpacking. The media can expand and
contract due to the room temperature and humidity.
The media have to be left in the atmosphere in which they are to be used for
30 minutes or more after unpacked.
• Curled media
Avoid the use of curled media. They can be a cause of a media jam.
If regular-sized coating media is stored with rolled, the coating face has to
face outside.