MIMAKI JFX200-2513EX, Requests For Daily Care And Maintenance, Page: 12 / 28

12
Weekly Maintenance
Maintenance of Machine Exterior
Depending on the usage environment, trash and dust may stick to the exterior of the main unit. To prevent
dust from entering the head moving part, soak a soft piece of cloth in water, wring it tightly and then wipe off
the dust.
Table Maintenance
If there is dirt or ink adhering to the table, wipe it off with a cloth soaked in ethanol.
• If the ink is left stuck to the table for a long time, it becomes difficult to remove it using ethanol.
• The ink may stick to the vacuum hole of the table surface and clog it. Remove the ink from the vacuum
hole as and when necessary. When removing the ink, do not leave fragments of hardened ink on the table
surface.
Washing the Ink Discharge Passage
Wash the ink discharge passage periodically to prevent ink from hardening and clogging inside it.
1
Press the [MAINT.] key in LOCAL.
CARRIAGE OUT
[ENT]
2
Press to select [DISWAY WASH].
DISWAY WASH
[ENT]