MIMAKI GP-604D, Operation Manual

Page: 89 / 134

- 5.9 -
If nozzles are clogged even after the cleaning function is executed
Executes the following two functions in case the nozzle cogging cannot be solved even after per-
forming head cleaning. ( page 2.8)
[NOZZLE WASH] :
Cleans the nozzle with the dedicated cleaning fluid (option).
[FILL UP INK] : Fills up ink.
[HEAD WASH]
: Cleans the head, tube, and damper with the dedicated cleaning fluid (option).
[Disway WASH] : Cleans the ink discharge way with the dedicated cleaning fluid (option).
In the case of nozzle clogg was not recovered by repeating [FILL UP INK] and [WASH]
several times, contact your local distributor to call for service.
Cleaning the nozzle [NOZZLE WASH]
• If nozzle clogging cannot be resolved even after cleaning several times,
execute the [FILL UP INK] and [WASH] functions ( page 5.11) .
If this error cannot be resolved with these functions, contact the dealer.
STEPS:
1. Push the [FUNCTION] key.
2. Push the key until the display gives the indica-
tion [MAINTENANCE].
3. Push the [ENTER] key.
[STATION] is displayed.
4. Push the [ENTER] key.
[NOZZLE WASH] is displayed.
5. Push the [ENTER] key.
Move the carriage on the platen.
6. Open the front cover.
7. Holding the projections at both ends, draw out
the wiper.
FUNCTION
SET UP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
STATION
< ent >
STATION
MENT : NOZZLE WASH
Wiper Cleaning
COMPLETED
:ent