MIMAKI DS-1600, Operation Manual

Page: 97 / 172

- 3.15 -
Increasing (decreasing) the right and left margins of the fabric
[RIGHTmargin]/[LEFTmargin]
This function sets an effective printing area to increase/decrease the right and left margins of
the fabric. The blank portion of the fabric is called maigin. (See page 1.47)
The function is used to increase the margin for binding.
You can set a maigin for each of the right and left margins of the fabric.
Setting [RIGHTmargin]
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[MARGIN].
4. Press the [ENTER] key.
5. Press the [ENTER] key.
6. Press the JOG keys [ ] and [ ] to set a maigin.
You can set a margin in the range -9 mm to 95 mm in mm unit.
Here, set [10 mm].
7. Press the [ENTER] key.
8. Select the following operation.
To set LEFTmargin, press the [ENTER] key (after setting
RIGHTmargin) and select Dead Space (LEFTmargin) by press-
ing the JOG keys [ ] and [ ].
9. Press the [END] key three times.
The menu returns to the LOCAL mode.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
M A R G I N < e n t >
< < L O C A L > >
w i d t h : 1 2 7 2m m
T Y P E 1
R I G H T ma r g i n < e n t >
T Y P E 1
R I G H T ma r g i n = 0m m
T Y P E 1
R I G H T ma r g i n = 1 0m m
T Y P E 1
R I G H T ma r g i n < e n t >
T Y P E 1
L E F T m a r g i n
< e n t >