MIMAKI DS-1600, Operation Manual

Page: 86 / 172

- 3.4 -
Changing the type
Note that the current type cannot be changed while the device is in operation.
To change the type during plotter operation, first stop the device (See page 2.7) and then
select the desired type in the LOCAL mode.
• Only the setting of the following items can be changed during printing.
[MM/INCH], [MEDIA COMP.], [TAKE-UP]
If you attempt to change the setting of other items during printing, the follow-
ing error message appears.
E R R O R 3 4
D A T A R E MA I N