MIMAKI DS-1600, Operation Manual

Page: 135 / 172

- 4.25 -
Menu displayed after the ink cartridge is installed [FILL UP INK]
When the ink cartridge is replaced with a new one or a new ink cartridge is installed, the
plotter charges ink automatically. Therefore, a menu for charging ink is included in the main-
tenance functions. Normally, however, this function is not used.
STEPS:
1. Select [FILL UP INK] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
3. Press the JOG keys [ ] [ ] [ ] [ ] to select the
head to be filled up.
Each time a JOG key is pressed, the row of heads to be cleaned
changes from R to F (or F to R). The upper eight of test printing
indicates the R row of heads, and the lower eight indicates the
F row of heads.
4 types of head row can be selected: [1234], [5678], [ABCD],
and [EFGH].
4. Press the [ENTER] key.
Ink filling up is started.
Remaining time for ink filling up is displayed on the second line
of LCD.
After completing the performance, the LCD shown on the right
is displayed.
5. Press the [END] key twice.
The mode enters the LOCAL mode.
F I L L U P : 1 2 3 4 5 6 7 8
S E L E C T : A B CD E FGH
F I L L U P : - - - - 5 6 7 8
S E L E C T : A B CD E FGH
C L E A N I NG : - - - - 5 6 7 8
S E L E C T :
A B CD E FGH
F I L L U P
0 0 : * * : * *
< < L O C A L > >
w i d t h : 1 2 7 2m m
F I L L U P
P L E A S E WA I T
M A I N T E N A N C E
F I L L U P I N K < e n t >
M A I N T E N A N C E
F I L L U P I N K < e n t >