MIMAKI DS-1600, Operation Manual

Page: 119 / 172

- 4.9 -
6. Close the maintenance cover, then press the
[ENTER] key.
The menu enters the LOCAL mode.
If a defective printing is not corrected even after the cleaning function is executed
Cleaning the ink caps
Clean the ink caps if a defective printing is not corrected or nozzles are clogged even after the
cleaning function is executed or when the plotter is left unused for a long period of time.
STEPS:
1. Execute the station maintenance [CARRIAGEout]
to move the carriage.
(See the steps 1 to 4 on page 4.8)
2. Open the maintenance cover.
3. Remove stains with a swab from the rubber
mounted around the cap.
4. Close the maintenance cover, then press the
[ENTER] key.
The menu enters the LOCAL mode.
Rubber
< < L O C A L > >
w i d t h : 1 2 7 2m m
I N T I A L I Z I N G
P L E A S E WA I T
S T A T I O N M A I N T
M A I N T : CA R R I AGE ou t
< < L O C A L > >
w i d t h : 1 2 7 2m m
I N T I A L I Z I N G
P L E A S E WA I T