MIMAKI DS-1600, Operation Manual

Page: 108 / 172

- 3.26 -
Enabling the take-up unit [TAKE-UP]
This function enables the take-up unit.
ON : Enables the take-up unit automatically.
OFF : Does not enable the take-up unit.
• Operates according to slack and limit sensor.
• In case Leaf is selected for the fabric used, the take-up unit is not enabled.
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[TAKE-UP].
4. Press the [ENTER] key.
5. Press the JOG keys [ ] and [ ] to select [ON] or
[OFF] of the [TAKE-UP].
Here, select [ON].
6. Press the [ENTER] key.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
T A K E - U P
< e n t >
< < L O C A L > >
w i d t h : 1 2 7 2 m m
T Y P E 1
T A K E - U P
: OF F
T Y P E 1
T A K E - U P
: ON
T Y P E 1
T A K E - U P
< e n t >