MIMAKI DS-1600, Operation Manual

Page: 105 / 172

- 3.23 -
Continuing printing after [Ink Near End] [PRINT CONT.]
If the remaining amount of ink decreases during printing and [Ink Near End] appears, you can
replace ink for each ink station and then continue printing for the next file.
ON : Even if [INKnearEND] appears, you can use only one ink station to
continue printing for the next file.
OFF : When printing for the file with [Ink Near End] occurrence is completed,
you need to replace ink.
• If different types of ink are set in the two ink stations, this function cannot be
used since [PRINT CONT.] is not displayed on the LCD.
• If [Ink End] occurs during printing, printing is stopped.
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[PRINT CONT.].
4. Press the [ENTER] key.
5. Press the JOG keys [ ] and [ ] to select [ON] or
[OFF] of the [PRINT CONT.].
Here, select [ON].
6. Press the [ENTER] key.
7. Press the [END] key twice.
The menu returns to the LOCAL mode.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
P R I N T C O N T . < e n t >
T Y P E 1
P R I N T C O N T . < e n t >
< < L O C A L > >
w i d t h : 1 2 7 2m m
T Y P E 1
P R I N T C O N T .
: OF F
T Y P E 1
P R I N T C O N T .
: ON