MIMAKI DM3-1810S, Operation Manual

Page: 97 / 146

- 5.11 -
Fill up the ink [Ink Filling]
Perform the [Storage Wash] function for nozzle clogging when head cleaning or [Nozzle cleaning]
does not work.
In addition, when the [Nozzle cleaning] function or the [Storage Wash] function is performed, this
may cause color mixture.
Perform the [Ink Filling] function to discharge mixed color ink.
STEPS:
1. Make sure that the FUNCTION mode is dis-
played.
2. Press the [ ] or [ ] keys to select [MAINTE-
NANCE].
3. Press the [ENTER] key.
4. Press the [ ] or [ ] keys to select [Ink Filling].
5. Press the [ENTER] key.
6. Press the XY [ ] or [ ] keys to select a head
with no ink.
1256/3478/ABEF/CDGH
7. Press the XY [ ] or [ ] keys to indicate a head
with no ink by [----].
8. Press the [ENTER] key.
9. When filling up some ink, back to STEP 4.
FUNCTION
SETUP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
List
< ent >
MAINTENANCE
Ink Filling
< ent >
Filling
00: ∗ ∗ : ∗ ∗
MAINTENANCE
Ink Filling
< ent >
Filling : 1 2 5 6 - - - -
Select : - - - - - - - -
Filling : 1 2 5 6 3 4 7 8
Select : A B E F C D G H -
Filling : 1 2 5 6 3 4 7 8
Select : A B E F C D G H -