MIMAKI DM3-1810S, Operation Manual

Page: 88 / 146

- 5.2 -
Maintenance of the machine
The term “maintenance” as used herein refers to actions that need to be taken to keep the machine in
good operating condition.
To carry out maintenance of the machine, select [MAINTENANCE] from the function menu and
make the necessary settings.
Setting the maintenance function
In order to execute any of the maintenance functions, it is necessary to perform the following opera-
tion on the operation panel.
You have to understand how to invoke the desired maintenance function to carry out maintenance.
STEPS:
1. Make sure that the mode is LOCAL mode.
2. Press the [FUNCTION] key.
3. Press the [ ] or [ ] keys to select [MAINTE-
NANCE].
4. Press the [ENTER] key.
5. Select the next operation.
Set up the desired maintenance function to carry out mainte-
nance. ( page 5.3)
<< LOCAL >>
X =1010 Y = 1860
FUNCTION
SETUP
< ENT >
FUNCTION
MAINTENANCE < ENT >
MAINTENANCE
List
< ent >