MIMAKI DM3-1810S, Operation Manual

Page: 17 / 146

- xiii -
Precautions in installation
CAUTION
A place exposed to direct sunlight
• Do not install machine where it is
exposed to direct sunlight or
work may be discolored.
A place in which temperature and humidity vary
by a great margin
• Use the machine under the
following environment.
Operating environment:
20 to 35 ° C
35 to 65% (Rh)
A place exposed to direct air blowing from air
conditioner, etc.
• Do not install the machine that is
directly exposed to blowing air
from an air conditioner, etc, or
you may get spattered with the
ink.
A place that is not horizontal
• Do not place the machine where
the machine can not be installed
on a level surface, or you may
not secure the stabilized print
work.
A place that vibrates
• Do not install the machine
where it is subject to vibration or
you may not secure the stabi-
lized plot work.
A place full of dust or cigarette smoke
•
Do not install the machine
where it is exposed to significant
dust or cigarette smoke, or the
dust may adheres to the ma-
chine and cause the ink drops to
deflect.
Safety precautions during installation