MIMAKI CJV30 Series, Maintenance Manual

Page: 31 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 1.2.9 P.1
1
2
3
4
5
6
7
8
R.1.1
Maintenance Manual > Operating Principle > Maintenance Function > Waste Ink Tank Warning
Model CJV30/TPC Issued 2008.08.04 Revised 2008.09.17 F/W ver. 1.20 Remark
1.1
Rev.
1.2.9 Waste Ink Tank Warning
 Indication on LCD
 Outline
The counter in the machine monitors the amount of discharged ink. Depending on the status, the message is displayed
on LCD to urge you to replace the waste ink tank before operations involving suction (cleaning, filling, and discharge).
 Explanation of situation
No. Status Description
Indication
on LCD
1 [!WASTE TANK] is
displayed locally. 1. Is displayed when the counter in the machine reaches full or more.
2. When it is displayed, sleep and routine operations (REFRESH, PUMP TUBE
WASH, CLEANING) are not performed.
3. When you cancel the warning message, be sure to replace the waste ink tank
before executing [MAINTENANCE] -> [InkTankReplace].
4. The operation in “3” clears the counter in the machine.

2 Waste ink tank reaches near
full. 1. If you select “Continue”, the present operation is continued. The warning
message is displayed again during the next suction operation.
2. If “REPLACE” is selected, the present operation is continued. The counter
value in the firmware is cleared.

3 Waste ink tank reaches full. 1. Replace the waste ink tank or dispose of ink.
2. The present operation is continued by depressing [ENTER] key.
The counter value the machine is cleared.

 If you select “REPLACE” in the operation as above when the waste ink tank is near full or full, be sure
to replace the waste ink tank or dispose of ink.
If you continue to use the waste ink tank without replacing it, the waste ink may overflow before the
confirmation message is displayed.
 The waste ink discharged when [NOZZLE WASH], [PUMP TUBE WASH] or [COSTODY WASH]
of [ST.MAINTENANCE] is performed is not cumulatively counted in this unit.
Before and after these operations, be sure to check the status of the waste ink tank.

Warning display in local mode
<LOCAL. 1> [#01]
!WASTE TANK

Display when near full is reached
Confirm a waste tank
Continue< >Exchange

Display when full is reached
Confirm a waste tank
Exchange :ent