3-14
Adjustment to an Appropriate Temperature
This section describes how to adjust the temperature of the heaters to an appropriate one.
Because the heater temperature should be different, depending on the types of media, ambient temperature,
etc., set an appropriate temperature for each medium. For non-coated media or media on which ink is slow to
dry, increase the heater temperature so that the ink fixing and drying characteristics can be improved.
Check the items in the following method to set an appropriate temperature.
Wait until the CONSTANT lamp lights up.
Set the temperature of the heaters. (
Make media correction. (
Yes
No
Is the medium wrinkled?
Test printing
Does the medium stick to the platen?
Does beading occur?
End
Lower the
heater
temperature.
Raise the
heater
temperature.
Move the medium
back and forth with
the [
] and [
] keys.
Initially, set a
higher temperature.
No
No
Yes
Yes
Summary of Contents for CJV30-100
