MIMAKI CJV30-100, Operating Manual

Page: 234 / 274

8-2
Main Body Specifications
Printer Section Specifications
Cutter Section Specifications
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Printing head
Method Drop-on-demand piezoelectric print heads
Specification One head
Printing mode
(scanning x feeding) 720 x 540 dpi / 540 or 720 x 720 dpi / 540 x 900 dpi /
540 or 720 x 1,080 dpi / 720 x 1,440 dpi / 1440 x 1,440 dpi
Usable inks Either ES3 ink or SS21 ink
Ink supply
Supplied from ink cartridges through tubes
Ink cartridge replacement method:
Only when four colors are used: Supplied by toggle switchover with two cartridges per color
Amount of supplied ink
When six colors are used:
One 440-cc cartridge for each color, 440 cc per color (two cartridges (880 cc in total) only
for each of magenta and cyan)
When six white color are used:
White Two 220-cc cartridges, 440 cc per color
Other colors One 440-cc cartridge for each color, 440 cc per color
When four colors are used:
Two 440-cc cartridges for each color, 880 cc per color
Usable media Tarpaulin / FF(Flexible Face) / Polyvinyl chloride film / MS Chloroethene / MS Tarpaulin
Dead space
Leaf
medium Left and right: Inside the pinch roller detection position (default value) /
Front: 40.0 mm / Rear: 98.5 mm
Roll
medium Left and right: Inside the pinch roller detection position (default value) /
Front: 40.0 mm / Rear: 0.0 mm
Head height adjustment 2.0 mm / 3.0 mm (from the platen surface) 2-step adjustment
Waste ink tank Bottle type (2,000 cc)
Image memory SD-RAM 128 MB
Command MRL-III (MIMAKI original command)
Item CJV30-60 CJV30-100 CJV30-130 CJV30-160
Cutting head
Method Drop-on-demand piezoelectric print heads
Specification One head
Maximum speed
*1
30 cm/s (42 cm/s in the direction of 45 degrees)
Maximum acceleration 1 G
Cutting pressure 10 to 400 g
Usable tools
Eccentric cutter / water-based ballpoint pen / oil-based ballpoint pen /
Ballpoint pen for handwriting (sold on the market)
*2
Number of times the cutter responds
to a medium
10 times/sec
Usable media
Polyvinyl chloride sheet (0.15 mm thick or less) / fluorescent sheet
*3
/
reflecting sheet
*2
(excluding high-intensity reflecting sheets)
Dead space
Leaf
medium Left and right: Inside the pinch roller detection position (default value) /
Front: 40.0 mm / Rear: 98.5 mm
Roll
medium Left and right: Inside the pinch roller detection position (default value) /
Front: 40.0 mm / Rear: 0.0 mm
Repetition accuracy
*4
± 0.2 mm (excluding the expansion and contraction due to the temperature of the film)
Reception buffer memory SD-RAM 30 MB (20 MB when the sorting function is effective.)
Command MGL- II c2
Program step 25
µ
m / 10
µ
m