MIMAKI CJV30-100, Operating Manual

Page: 195 / 274

6-21
When Nozzle Clogging Cannot Be Solved
6 6
Mai
ntenanc
e
Supplying the Machine with Ink Anew
After you have performed [DISCHARGE & WASH], supply the machine with ink anew with the following
operations.
1
Turn on the power of the machine.
• When the power is turned on, the firmware version is displayed
following [BOOT].
2
Press to select the type of ink to supply to
the machine.
• To check the state of the cartridge, press the key. ( P.7-5)
3
Press to select an ink set (set of colors) to supply to the machine.
• You cannot change the current ink set to another by yourself.
• If you want to change the ink set, contact our service office.
4
Press the key.
5
Mount an ink cartridge on the ink station.
• When an ink cartridge has been set, the machine is supplied with ink
automatically.
• The ink station has an insertion slot allocated to each ink color. Set the ink cartridge according to the
cartridge label under the ink station.
BOOT
C J V 3 0 - 6 0 V * . * *
P l e a s e Wa i t
I NK T YPE
SS 2 1 S o l
SS 2 1 I NK SE T
4 - C o l o r ( MMCCYYKK )
S e t : SS 2 1 - 4 c o l o r I n k
- - - - - - - -
S e t : SS 2 1 - 4 c o l o r I n k
- - C - Y - KK
F I L L I NG UP NOW.
0 0 : 0 0
Front side
4-color model:
6-color model:
6 white model (SS21W-2):