MIMAKI CJV30-100 Operating Manual Download Page 192

Page: 192 / 274

6-18

When Nozzle Clogging Cannot Be Solved

When nozzle clogging cannot be solved even after the ink head cleaning (

P.2-36) or head nozzle washing

(

P.6-11) has been done, perform the following two functions:

FILL UP INK

Press the

key in LOCAL to select the

printing mode.

Select [HD. MAINTENANCE] of the maintenance menu.

(1)

Press the

key.

(2)

Press

to select [MAINTENANCE] and press the

key.

(3)

Press

to select [HD. MAINTENANCE].

(4)

Press the

key.

Press the

key.

• Ink is supplied automatically.

• When ink has been supplied completely, the screen returns to the

shown on the right.

Press the

key several times to end the setting.

FILL UP INK

• Ink is supplied to solve nozzle clogging.

DISCHARGE & WASH

• The head, tube, and damper are washed with dedicated cleaning solution (optional).

(

P.6-19)

< LOCA L . 1 >

[ # 0 1 ]

WI DTH : * * * * mm

F I L L I NG UP

0 0 : 0 0

HD . MA I NT ENANCE

F I L L UP I NK

< e n t >

Summary of Contents for CJV30-100



















































































































































































































































































Search results

Summary of Contents for CJV30-100

Reviews:

Related manuals for CJV30-100

Brands by name

Popular brands

MIMAKI CJV30-100, Operating Manual

Search results

Summary of Contents for CJV30-100

Reviews:

Related manuals for CJV30-100

Brands by name

Popular brands