MIMAKI CG-AR, Operation Manual

Page: 8 / 24

Installing the Plotter Driver
8
6
Click [The printer that I want isn’t listed] below the printer list.
• The [Add Printer] wizard appears.
7
Select [Add a local printer or network
printer with manual settings], then
click [Next].
8
Select the printer port, then click
[Next].
• The [Install the printer driver] window appears.
• If no port is found, check the connection between the plot-
ter and the PC.
• The printer port can be changed later.( "Set the output
port" (P.17) onward)
9
If "MIMAKI" is not listed for the manu-
facturer, proceed to the next step.
If "MIMAKI" is listed for the manufac-
turer, select the following items, click
[Next], then proceed to
Step 14 (P.9) .
• Manufacturer: MIMAKI
• Printer:
MIMAKI CG-AR Series
10
Click [Have disk].
11
Click [Browse].