CG-100/130AR
- 1 -
© 2021 MIMAKI ENGINEERING CO.,LTD.
Installation instructions for the legs
Introduction
This manual explains how to assemble the legs with the main unit. Be sure to read this manual before
assembling.You can also use your smartphone to scan the QR code below and view the 3D Instruction while
assembling the product.
Accessories
If there is a shortage of parts or a problem, please contact your local distributor or MIMAKI sales office.
How to tighten the screws
1
Use hex wrench to temporarily tighten the
screws (just tighten lightly).
2
Push the hex wrench into the tightening pipe
and retighten the screw.
Be sure to assemble with two or more people.
Leg x2
Caster holder x2
Leg stay x1
Base plate S x 2
Roll holder x2
Roll bar x2
Roll stay Right x1
Roll stay Left x1
Hexagonal wrench
(4mm)x 1
Tightening pipe x 1
Screws (M5x25) x4
Screws (M5x15) x 14
Screws (M5x16) x4
