MIMAKI cg-100AP, Instruction Manual

Page: 138 / 180

4-2
Outline of diagnostics
Abnormal operations and degraded outputs of the UNIT are investigated for the causes by means of the self
diagnosis functions. The following five items are involved in the self diagnosis functions.
Sample Cut ---> P.4-3
A pattern is cut so as to verify the cutting quality.
Square Cut ---> P.4-4
A pattern is cut square so as to verify the cutter tooling condition.
Dump Test ---> P.4-5
Received data are plotted with the ASCII data.
Status Display of Signal Conductor ---> P.4-6
The status of the RS-232C signal conductor is changed over so as to display on the display
panel.
Plotting of Demonstration Pattern ---> P.4-7
A pattern is plotted so as to verify the plotting quality and plotting function as well as evaluation
of the plotting performance.