MIMAKI cg-100AP, Instruction Manual

Page: 111 / 180

CHAPTER 3
APPLIED FUNCTIONS
3-3
APPLICATION FUNCTION GENERAL
Applied Setting
Compensation of Plotting Distance ---> P.3-18
Comparing the length of lines to be plotted in the CAD data and length of lines actually plotted,
the error will be compensated.
Buzzer Setting ---> P.3-20
The setting the buzzer whether Buzzed or not under an erroneous state will be accomplished.
Equipment Name Setting ---> P.3-21
The respondable equipment name will be set in accordance with the CAD to be used by the user.
Paper Type Setting ---> P.3-22
At a paper setting, the mode either selecting the paper type by every time or selecting default
paper type will be changed over.
Resolution Setting ---> P.3-24
The resolution of the plotter will be set.
Plotting List to be set-up conditions---> P.3-23
The data of all settings of the UNIT will be plotted.
Automatic Interpretation of Communication Conditions ---> P.3-25
A function to set communication conditions as transmitting data from the CAD to be used by the
user when the communication conditions of the CAD are unknown.
System Setting ---> P.3-27
There are items necessary to set by the CAD commands and other convenient application settings.
Miscellaneous
Paper Cutting ---> P.3-5
A page of plotting data on a roll paper can cut at an arbitrary position.
Movement of Origin ---> P.3-12
A command origin can move to an arbitrary position.