MIMAKI CFL-605RT, Operation Manual

Page: 66 / 170

2-26
Cutting (Drawing)
Interrupting Processing (Data Clear)
In the following cases, clear the received data from the receive buffer.
(1) To clear an interrupted cutting (drawing) file from the receive buffer, without restarting
processing.
(2) To clear received but unprocessed data from the receive buffer.
(3) To clear data remaining in the receive buffer before receiving data from running the SINGLE
COPY function.
(4) To cut using a PC that is different from the PC that sent the cutting data the previous time.
1
Set local status.
• If the unit is in remote status, press to set local status.
• Press during data processing to interrupt the
processing.
2
Press .
3
Press .
• The data is cleared.
• Press
to cancel the data clear. Return to Step 2.
< LOCA L >
B : CUT T ER 1
< LOCA L >
DA T A C L EAR < ENT >