MIMAKI CF3-1610, Operation Manual

Page: 85 / 166

2-29
2
Bas
ic Operations
Setting the Cutting Area
The maximum cutting area is set when the unit is turned on.
The cutting area can be set to any size to match the size of the
workpiece.
The cutting area is set by designating the lower-right (LR) and
upper-left (UL) points of the cutting area.
1
Press to display the local menu.
• If the unit is in remote status, press to set
local status.
2
Display the fourth page of the local menu.
• Press several times.
3
Press .
[CUT AREA] is selected.
4
Press .
• The light pointer moves to the currently set lower-right
(LR) point.
• The coordinates are displayed with respect to the
command origin position.
5
Align the light pointer with the lower-right
corner of the required cutting area.
• Press the jog keys to move the light pointer to the
lower-right corner (LR) of the cutting area that you wish
to set.
• If necessary, change the head travel speed.
•
To change the head travel speed , press .
• To clear the set cutting area, turn the unit off and back
on. The cutting area reverts to its maximum size.
Cutting
area
Lower-right point (LR)
Upper-left point (UL)
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I ON - - - >
T ES T CUT - - - >
[ LOCA L ] 4 / 5
CUT AREA - - - >
AX I S A L I GN - - - >
MANUA L CUT - - - >
<CUT AREA >
LOWER R I GHT
>
< AREA L / R>
- 6 0 0 . 0 - 4 5 0 . 0
SPEED F AST >
Lower-right
point (LR)