MIMAKI CF3-1610, Operation Manual

Page: 78 / 166

2-22
Making a Test Cut
After changing the cutting conditions or tool, make a test cut to check the items listed below. For details, see
"Checking the Tool Status" (
P.2-23).
1
Press to display the local menu.
• If the unit is in remote status, press to set
local status.
2
Press the jog keys to move the
head to the test cut position.
3
Press .
• The local menu is displayed.
• If the first page of the local menu does not appear,
press to display the first page.
4
Press .
[TEST CUT] is selected.
5
Press .
• The test cut starts.
• Press
to cancel the test cut and return to Step 2.
No. Check Item Check Point
(1)
Are the cutting (drawing)
conditions suitable?
Work is correcly cut or drawing is not smudged.
(2)
Is tool mounted eccentrically? An eccentric tool can cause displacement in the cutting or drawing.
(3)
Do tools match?
When a tangential cutter cuts over a drawing, do the drawn and cut patterns
match?
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I O N - - - >
T ES T CUT - - - >
<OR I G I N> [ mm ]
0 0 . 0 0 0 0 . 0 0
SPEED F AST >
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I ON - - - >
T ES T CUT - - - >
< TES T CUT >
END KEY t o S T ART
CE KEY t o CANCE L