MIMAKI CF3-1610, Operation Manual

Page: 50 / 166

1-36
Enabling PC Commands (CMD SW)
This setting enables the values set by the operation panel or the values (commands) set by the PC.
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Display the third page of the MODE SET
menu.
• Press several times.
4
Press to select the [CMD SW] set value.
• Enable , Disable
5
Press .
• The settings are saved.
• Press
if you do not want to save the settings.
Item Set value
Enable
Give priority to commands received from the PC. Ignore settings from the
plotter operation panel.
Disable
Ignore settings received from the computer and give priority to settings from
the plotter operation panel.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
<MODE SET > 3 / 7
ROT A TE + 9 0 ° >
COMMANDMGL - I I C3 >
CMD SW
E n a b l e >