MIMAKI CF3-1610, Operation Manual

Page: 142 / 166

6-8
Adjusting the
θ
Angle
Adjust the angle of rotation by comparing a test pattern drawn by
the pen with a test pattern drawn by the cutter or roller.
1
Display the fifth page of the local menu.
• Press several times.
2
Press and select
TOOL ADJUST.
• If Head C is the cutter, the third line displays
[C CUTTER ADJUST].
3
Press or .
• : Selects Head B
: Selects Head C
4
Press several times to display
the second page of the menu.
• The
θ
Adjust Angle Screen is displayed.
• If a head containing a roller was selected at Step 3,
[ROLLER
θ
] is displayed in the second line.
5
Press the jog keys to move the head to the drawing position.
• If a head containing a roller was selected at Step 3, proceed to Step 7.
6
Press and select Pattern 1
or Pattern 2.
• Two adjustment test patterns are available for a cutter:
Pattern 1 and Pattern 2.
Values in parentheses ( ) in the diagram show the sizes
of Pattern 2.
• First, mount a pen in Unit A.
30 (200)mm
30
(200)
m
m
Normal
test pattern
2 (2)mm
[ LOCA L ] 5 / 5
RESERVE - - - >
RESERVE - - - >
TOOL AD J US T - - - >
< TOOL AD J UST > 1 / 2
B CUT T ER AD J UST >
C ROL L ER AD J UST >
C I RC L E
θ
COR >
< AD J > CENT ER 1 / 3
A ( L ENG ) + 0 0 . 0 0 >
B + 0 0 . 0 0 >
T ES T PA T T ERN - >
< AD J >
θ
2 / 3
CUT T ER
θ
+ 0 0 0 0 >
PAT T ERN N o . 1 >
T ES T PA T T ERN - >
< AD J >
θ
2 / 3
CUT T ER
θ
+ 0 0 0 0 >
PAT T ERN N o . 2 >
T ES T PA T T ERN - >