MIMAKI CF2 Series, Operation Manual

Page: 30 / 186

— 1.14 —
Connecting the power cable
Two power cables are provided, one for the main unit and the other for the blower unit.
Insert the respective power cables into the receptacles of the following specifications.
Power cable for the main unit Power cable for the blower
Voltage 100 VAC ± 10% / 220 VAC ± 10%
Frequency 50/60 Hz ± 1% Depend on the types of option.
Capacity 500W or more (10A or more)
• Be sure to insert the power cable into an appropriately-grounded receptacle.
If not, there is a fear of the arising of electric shock hazards and damage to the
device.
• Many types of blowers are available as an option.
Cable speciffication differs depend on the blower type. Be sure to follow the
“Blower installation” manual when connectting.
1
Press the POWER OFF switch .
2
Insert the power cable for the plotter
into the AC inlet of the electrical box.
Power cable for the main unit
WARNING