MIMAKI CF-0907, Instruction Manual

Page: 2 / 170

This device is a first-class information processing device (information processing device that
shall be commissioned in a commercial and industrial area) and conforms to the Voluntary
Control Council Interference (VCCI) standard that has been developed for the purpose of
prevention of radio disturbance in commercial or industrial areas. This device, therefore, can
interfere with radios and televisions if put into service in a residential area and its adjacent
areas. Correct handling procedure shall be followed according to this Instruction Manual.
In the case where MIMAKI-designated cable is not used for the connection of this device, limits
provided by VCCI rules can be exceeded. To prevent this, use of MIMAKI-designated cable is
essential for the connection of this device.
Interference to televisions and radios
The product covered by this Instruction Manual produces high frequency waves while it is in opera-
tion. The product can interfere with radios and televisions if set up or commissioned under
improper conditions. The product is not guaranteed against any damage to specific-purpose radio
and televisions. The product’s interference with your radio or television will be checked by turning
off the power to the product.
If the interference is elimiated by turning the product off, the product is the cause of interference.
In the event that the product is the cause of interference, try to elimiate it by taking one of th
following corrective measures or taking some of them in combination.
• Change the direction of the antenna of your radio/television to find one that avoids interference.
• Install your radio/television at a place that is sufficiently spaced from the product.
• Connect the plug of your radio/television into a receptacle that does not share the power supply
with the product.
CAUTION
• MIMAKI ENGINEERING CO., LTD. shall have no liability for any damage of any kind (in-
cluding but not limited to unearned profits, indirect damages, special losses and other debts)
caused by the use of malfunction of the product unless otherwise specified in MIMAKI warranty
provisions. The same applies to any case where MIMAKI ENGINEERING CO., LTD. has been
informed of the possible risk of such damages in prior.
For example, MIMAKI shall not be liable to any damage to media (works) due to the use of the
product or any indirect damage that is caused by a product that is manufactured with damaged
media.
• Reproduction of this manual in whole or in part is strictly prohibited.