MIMAKI AMF-250, Operation Manual

Page: 13 / 42

- 1.3 -
Configuration and Function
3
6
5
2
1
2
1
Name Function
1 Media Holder Used when placing the light roll paper.
2 Guide pipe press left/right Lock guide pipe to prevent lifts at the media.
3 Guide pipe This pipe is inserted into the media center to set up the media to the
Auto Media Feeder. Replace the media holding the right and left
handles of the guide pipe.
4 Roll guide Roll guide feeds the media into the plotter .
5 Tension bar This bar sets up the media into the Auto Media Feeder. Tension bar
adds tension to the media, and then feeds them into the plotter.
Adding a constant and stable bar weight makes installation improved.
6 Switch-Changeover/Action There are two types of switches- Auto/Manual and Roll out/Stop/Roll
in. Refer to the [ Setting the Switch-Changeover/Action].
*For details about the name of the plotter, refer to the operation manual for the plotter.
4