MIMAKI 3042 MkII EX Operation Manual Download Page 19

Page: 19 / 126

1-3

Chapter 1 Before Use

Configuration and Function

Front

Below is an illustration of UJF-3042MkII.

*1: Although the carriage stops when you open the front cover, the interlock is not activated.

Ink supply unit

Insert ink bottles here.
(

P.1-13)

Table (

P.2-4)

Set media on it.

Operation Panel (

P.1-6)

Operation keys for setting
the machine, and a display
to display operation items
are placed.

Power button

Turn ON/OFF the power of
this machine instead of the
power switch of main body.
(

P.2-3)

Carriage (

P.1-4)

The carriage is provided with the
print head.

Waste ink tank

A tank collects waste ink.

Maintenance Cover

Open the cover during
maintenance.

Front cover

Open and close this cover when
replacing or setting the media.

Summary of Contents for 3042 MkII EX































































































































Search results

Summary of Contents for 3042 MkII EX

Reviews:

Related manuals for 3042 MkII EX

Brands by name

Popular brands

MIMAKI 3042 MkII EX, Operation Manual

Search results

Summary of Contents for 3042 MkII EX

Reviews:

Related manuals for 3042 MkII EX

Brands by name

Popular brands