background image

 

 

 

Sterylis  BASIC MANUAL                                                                                                                                                                            

  

| 7

 

 

4.

 

Product features 

4.1 Purpose

  

The product is designed for air cleaning and disinfection. Depending on the operating mode, it can work as a standard air 
purifier  and  an  air  purifier  extended  with  sterilization  lamps  with  UV-C  light  source  (in  standard  or  silent  mode).  The 
recommended maximum cubic capacity of the room in which the product can work is given in the technical characteristics 
of the product for each model. The device is designed for use in commercial areas. 

4.2 Product description 

STERYLIS BASIC room sterilizer is a device consisting of air filters, UV-C radiators of the fan(s) and a controller together 
with a user panel. The whole device is closed in a housing made of stainless steel, powder coated on the outside. A pre-
filter  (F1)  is  a  standard  filter  made  of  fully  synthetic  non-woven  fabric.  The  filtering  capacity  is  achieved  by  the 
phenomenon of attraction of pollutants by charged electrostatic fibres. The second filter is an active carbon filter (F2). It 
attracts harmful gases through adsorption. It stops both particulates and unpleasant smells. UV radiator is a battery of 
specialized light sources based on fluorescent tubes emitting UV-C radiation for air sterilization. A UV-C source does not 
produce ozone during operation. The fan drags the right amount of air through the filters and the UV lamp, making the 
cleaning and disinfection process possible. 
 
In filter mode, the room air is cleaned with a pre-filter (F1) and an activated carbon filter (F2). A pre-filter with electrostatic 
properties traps particles of harmful pollutants, including those of microscopic size (several micrometers). It also removes 
harmful bacteria and allergens using a coating applied to the filter medium. In addition to particles, the active carbon filter 
retains harmful gases and odours through adsorption. 
 
In the UV-C disinfection mode the UV-C lamps between the two filters are activated. The lamps emit UV-C radiation with a 
wavelength of 253.7 nm and power depending on the size of the device (see technical data). UV-C radiation irreversibly 
inactivates viruses, bacteria, fungi, moulds and yeasts. The Sterylis steriliser has been designed in such a way that people 
can stay inside when the device is in disinfection mode with the UV-C light source switched on. The UV-C radiation that 
breaks down the DNA is enclosed in a specially designed light trap so that not even the smallest part of it can escape 
outside the device. 
 
In the silent disinfection mode, the unit operates in a similar way to the standard mode, but with reduced fan capacity. 
This results in a significantly reduced sound power level of the steriliser. 
 
In the automatic disinfection mode, the device can operate on various programs, which are described in Chapter 6.3.4. 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for STERYLIS BASIC-100


























Reviews: