Milnor MilTouch MWB26Z, Operator'S Manual

Page: 15 / 38

Pellerin Milnor Corporation
13
BNCLKO05 / 2020512
BNCLKO05 0000254492 F.2 12/14/20 11:55 AM Released
3.6 Load the machine.
BNCLKO05.C01 0000278855 E.3 F.2 C.3 10/12/20 4:57 PM Released
The loading instructions for your machine depend on the method you use to weigh goods. There
are two methods:
• with the optional weighing system (load cells)
• with a separate laundry scale
3.6.1 To Load the Machine (Optional Weighing System)
BNCLKO05.T03 0000255623 E.3 F.2 3/5/21 10:34 AM Released
Use the following instructions to load your machine if it is equipped with the optional weighing
system. If your machine is not equipped with a weighing system, see
Section 3.6.2
1. On the Home display, select a formula. If you are using a flow meter, select the formula that
your chemical supplier or laundry specialist set to use Liquor Ratio Control (see Section
3.10.1.1 : About the Liquor Ratio Control Feature, page 18 ).
2. Touch . The
Weighing System
display appears, shown in the following figure.
Figure 7. Weighing System Display
Legend
A... Cancel the formula and re-
turn to the Home display
B... Select a pocket to load
C... The total weight of goods in
the machine
D... The maximum machine
capacity
E... The weight of goods in each
pocket
F... The maximum capacity for
each pocket (max capacity/#
of pockets)
G... Start the formula
H... Rotate the cylinder with the
AutoSpot™ feature to access
the next pocket on divided-
cylinder machines
I... Tares the scale back to zero
for the selected compartment
(pocket). The total weight
and locked-in weights (in
red) do not tare.
J... Enter the weight manually
for this load.
K... The customer (commercial
laundry) or department (insti-
tutional laundry) the batch
(goods) belongs to
Normal Operation