Milnor COELV00A, Installation And Service

Page: 8 / 35

6
Pellerin Milnor Corporation
BNSUUS06 / 2020074
BNSUUS06 0000275642 B.2 2/19/20 12:19 PM Released
1.3 Safety — Shuttle Conveyors
BNSUUS06.C01 0000275641 A.2 B.2 2/12/20 4:13 PM Released
1.3.1 Safety Alert Messages—Internal Electrical and
Mechanical Hazards
BNSUUS01.C03 0000240137 A.2 B.2 A.3 1/2/20 2:04 PM Released
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING:
Electrocution and Electrical Burn Hazards —
Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
�
Do not unlock or open electric box doors.
�
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
Keep yourself and others off of machine.
�
Know the location of the main machine disconnect and use it in an emergency to re-
move all electric power from the machine.
WARNING:
Entangle and Crush Hazards —
Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
�
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
Keep yourself and others off of machine.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
use them in an emergency to stop machine motion.
1.3.2 Safety Alert Messages—External Mechanical Hazards
BNSUUS02.C03 0000240134 A.2 B.2 A.3 1/2/20 2:04 PM Released
The following are instructions about hazards around the front, sides, rear or top of the machine.
CAUTION:
Strike and Crush Hazards — A traveling machine such as a shuttle can
strike, crush, or entrap you if you ride on it or enter its path. Traveling ma-
chines or their components can move automatically in any direction. Plac-
ing a system machine on line by energizing the machine control may
immediately summon a shuttle or other traveling machine.
�
Keep yourself and others off of machine.
�
Keep yourself and others clear of movement areas and paths.
�
Understand the consequences of placing a system machine on line.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
use them in an emergency to stop machine motion.
Genereal Service Information