Milnor COELV00A, Installation And Service

Page: 11 / 35

Pellerin Milnor Corporation
9
1.3.3.2.2 Careless Servicing Hazards—Vital Information for Service Personnel (see
also service hazards throughout manuals)
BNSUUS03.C07 0000240154 A.2 B.2 A.3 1/2/20 2:04 PM Released
WARNING:
Electrocution and Electrical Burn Hazards —
Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
�
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
�
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING:
Entangle and Crush Hazards —
Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
�
Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
�
Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING:
Crush and Entrap Hazards —
A traveling machine such as a shuttle can
crush or entrap you if the bed or bucket descends while you are under it.
The bed or bucket can descend with power off or on.
�
Secure both red safety pins in accordance with the instructions fur-
nished, then lock out and tag out power at the main machine disconnect be-
fore working under bed or bucket.
WARNING:
Strike and Crush Hazards — A traveling machine such as a shuttle can
strike, crush, or entrap you if you ride on it or enter its path. Traveling ma-
chines or their components can move automatically in any direction. Plac-
ing a system machine on line by energizing the machine control may
immediately summon a shuttle or other traveling machine.
�
Lock out and tag out power to the traveling machine at the main ma-
chine disconnect if you must work in the path of the traveling machine.
BNUUUN02 / 2019125
BNUUUN02 0000222452 B.3 1/2/20 2:14 PM Released
1.4 Torque Requirements for Fasteners
BNUUUN02.C01 0000222451 A.2 B.3 A.3 1/2/20 2:14 PM Released
The document about the assembly gives the torque requirements for other fasteners.
If fastener
torque specifications or threadlocker requirements in an assembly document are different
from this document, use the assembly document.
Genereal Service Information