Milnor 48040H7R, Maintenance Manual, Page: 13 / 85

Chapter 1. Machine Description, Identification, and Certification
PELLERIN MILNOR CORPORATION
Chapter
1
Machine Description, Identification,
and Certification
BIUUUF01 (Published) Book specs- Dates: 20120917 / 20120917 / 20120917 Lang: ENG01 Applic: IHN
1.1. About This Milnor
®
Machine—Rubber Spring-resting, Non-tilt
Washer-extractor
This manual applies to the Milnor products whose model numbers are listed inside the front cover
and which are in the families of machines defined below.
1.1.1.
Functional Description
Washer-extractors wash linen using water and nonvolatile chemicals and remove excess water
by centrifugal force.
Rubber Spring-resting Washer-extractor models are suspended washer-extractors with a
housing in which the shell rests on rubber springs. These models are for use in on-premise
laundry and industrial applications. Some of these models tilt to load and unload.
1.1.2.
Machine Identification
Find the model number and other data for your machine on the machine data plate affixed to the
machine. See the figure that follows.
— End of BIUUUF01 —
BIWUUL01 (Published) Book specs- Dates: 20120917 / 20120917 / 20120917 Lang: ENG01 Applic: IHN
1.2. General Content of the EC-Declaration of Conformity
Manufacturer: Pellerin Milnor Corporation
Hereby we declare under our sole responsibility that the machinery
Type (see the declaration for your machine)
Serial no (see the declaration for your machine)
Manufacturing date (see the declaration for your machine)
is in conformity with the provisions of
2006/42/EC (17 May 2006) - Machinery
2004/108/EC (15 December 2004) - Electromechanical compatibility
2006/95/EC (12 December 2006) - Low voltage
Pellerin Milnor Corporation certifies that the machine(s) listed above, manufactured in Kenner,
Louisiana, 70063, USA conform(s) as stipulated by schedule of verification of
9