manualshive.com logo in svg

Milltronics IQ Radar 160, Instruction Manual, Page: 60 / 81

Share
Download
Milltronics IQ Radar 160 Instruction Manual Download Page 60

Page 60

IQ Radar 160/160 Ex

PL-550

Parameter Descriptions

Entry:

1 = best of first and largest (factory
2 = reserved
3 = largest echo
4 = reserved
5 = reserved
6 = first echo

P825

Echo Marker Trigger

Authorized factory personnel only.

P830

TVT Type

Selects the TVT profile applied to the echo profile.

Entry:

1 = reserved
2 = reserved
3 = reserved
4 = Smooth 2 (factory – contact Milltronics for assistance with other selections)
5 = reserved
6 = reserved

P900

Software Revision

Displays the EPROM software revision level.

P901

Memory

Tests the memory. Test is initiated by scrolling to the parameter or repeated
by pressing 

.

Display:

PASS = normal
FAIL  = consult Milltronics

P911

mA Output Value

Displays the value from the previous measurement. A test value can be
entered and the displayed value is transmitted to the output. Upon returning to
the run mode, the parameter assumes the actual mA output level.

P920

Reading Measurement

Displays the reading measurement that the unit is programmed for in run
mode (P001, operation).

Summary of Contents for IQ Radar 160


















































































Reviews:

No comments