Milltronics IQ Radar 160, Instruction Manual, Page: 54 / 81

Page 54 IQ Radar 160/160 Ex PL-550
Parameter Descriptions
agitators tend to be more manageable at slower response rates, as these
make use of filtering, echo verification and longer fail-safe delay.
Note:
Select P003 for a measurement response just faster than the greater of the
maximum filling or emptying rate.
echo verification: discriminates between agitator blades in motion or
spurious noise, and the target surface (true echo).
filter: averages successive measurements to filter out false
echoes.
fail-safe timer: establishes the period from the time a loss of echo starts
until the fail-safe default (P071) is effected. The P003
preset timer value can be overridden by P070.
Entry:
measurement response echo
verification
filter f-s timer
(P070)
1 = 0.1 m/min slow on on 100
2 = 1 m/min • on on 10
3 = 10 m/min • on on 1
4 = 102 m/min • off on 0.1
5 = 1020 m/min fast off off 0
P004 Antenna
Identifies antenna configuration.
Entry:
240 = factory
241 = rod + 50 mm extension
242 = rod + 100 mm extension
243 = rod + 150 mm extension (50 + 100 mm)
Notes:
•
Setting this parameter automatically configures the offset correction,
P652.
•
Horn antennas and waveguide/horn combinations will come from the
factory with P652 pre-set and P004 set to 240.