Page 16
EnviroRanger Installation Guide
PL-601
In
s
ta
lla
tio
n
2. Slide the EnviroRanger through the panel cut-out.
3. Assemble mounting brackets to the EnviroRanger chassis by hooking them
into the top and bottom (bottom first).
4. Tighten the mounting bracket clamping screw (top & bottom).
5. Wire terminal board as per the Rack or Panel Mount wiring on page 24.
mounting bracket, hand tighten to
(1 in. lb. torque max)
panel cut out:
68 +0.7 by 138 +1.0 mm
(2.68 +0.03 by 5.43 +0.04 in.)
on 110mm (4.33”) centres
DIN 43700
72 x 144
panel material
68+0.7mm
(2.68+0.03”)
41mm minimum
(1.6”)
138+1.0mm
(5.43+0.04”)