PL-601
EnviroRanger Installation Guide
Page 13
In
s
ta
lla
tio
n
Mounting
Notes:
•
Rack and rails are supplied by the customer.
•
Terminal board screws are supplied by the customer.
•
Metallic racks must be grounded.
Rack Mount
1. Install rails at positions 5 and 15 as in diagram below.
Note:
Positions are in relation to left end of rack. Adjust measurements
accordingly if the unit is to be installed elsewhere along the rails.
21 HP
3U
18mm
0.71”
176mm
6.91”