Page 12
EnviroRanger Installation Guide
PL-601
In
s
ta
lla
tio
n
This RJ-11 port is located inside the enclosure of the Wall mount version,
and on the face of the rack and panel units (see below).
In addition, all EnviroRanger units have RS-232 connections on the
terminal board so they can be permanently wired to modems for remote
access, or telephone jacks for easy local access. See Optional Card Wiring
on page 29 for information on how to wire a permanent communications
connection to the EnviroRanger terminal board.
RS-485 Connections
RS-485 ports are available on optional I/O cards. See Optional Card Wiring
on page 29 for wiring of the RS 485.
Hand Programmer Access
If a laptop is not used to configure the EnviroRanger then ensure there is
enough room in front of the unit to stand with a hand programmer. The
hand held programmer is aimed at the receiver as shown below.
If values from the hand programmer are not accepted, (display does not
respond), try repositioning it. For the rack and panel mounted versions,
ensure that the program button is pressed and the unit is in program mode.
RJ-11 Port