Milli-Q Direct 16, User Manual, Page: 77 / 116

Milli-Q® Direct 8/16 System 77
Replacing the Progard® Cartridge and Vent Filter,
Continued
Placing Follow the steps below to install a new Progard® Cartridge.
Step Action Diagram
1 Remove the covers on the 2
ports of the Progard® Cartridge.
Wet the O-rings with water.
2 Install the Progard® Cartridge
until it is fully seated.
Close the right door.
3 When a new Progard® Cartridge
is installed, the LCD looks like
this.
4
Press .
5 When the Progard® Cartridge
flush has finished, the Water
System goes to READY Mode.