Miller XT40 Torch, Owner'S Manual

Page: 22 / 52

.
A complete Parts List is available at www.MillerWelds.com
OM-264 267 Page 18
Input6 2011 − 03 Ref. 253 558-A / Ref. 254 665-A
5-9. Connecting 120 Volt Input Power
1
!
Installation must meet all National and
Local Codes − have only qualified
persons make this installation.
!
Special installation may be required
where gasoline or volatile liquids are
present − see NEC Article 511 or CEC Sec-
tion 20.
See rating label on unit and check input voltage
available at site.
.
The Auto-Line circuitry in this unit
automatically links the power source to the
primary voltage being applied, either 120 or
240 VAC.
For 120 volts AC input power, a 15 or 20 ampere
individual branch circuit protected by time-delay
fuses or circuit breaker is required.
1
Multi-Voltage Plug Adapter And Power
Cord Connector (NEMA Type 5 − 15P Plug
Shown)
For multi − voltage plug adapter connections, see
Section 5-8.
2
Receptacle − NEMA Type 5 − 15R
(Customer Supplied)
2