A complete Parts List is available at www.MillerWelds.com
OM-4426 Page 28
5-12. Remote Receptacle Information
Engine runs at weld/power speed whenever a device connected to the remote receptacle is running.
803 571
A
J
B
K
I
C L N
H
D M
G
E
F
Socket*
Socket Information
24 VOLTS AC
A
24 volts ac. Protected by supplementary protector
CB4.
B
Contact closure to A completes 24 volt AC con-
tactor control circuit and keeps engine at Run
speed in all Wire modes.
115 VOLTS AC
I
115 volts ac. Protected by supplementary protec-
tor CB3.
J
Contact closure to I completes 115 volts AC con-
tactor control circuit.
REMOTE
OUTPUT
CONTROL
C
+10 volts dc output to remote control.
D
Remote control circuit common.
E
0 to +10 volts dc input command signal from
remote control.
F
Current feedback: 1 volt per 100 amperes.
H
Voltage feedback: 1 volt per 10 arc volts.
GND
G
Circuit common for 24 and 115 volts AC circuits.
K
Chassis common.
*The remaining sockets are not used.
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
