Miller I-24A, Owner'S Manual

Page: 20 / 36

OM-186895 Page 16
5-6. Optional Meter Circuit Board Settings
801 925-C / Ref. 186 266
Tools Needed:
1/4 in.
1 Meter Circuit Board
2 DIP Switch S2
Set DIP switch S2 for type of
welding power source, and desired
wire feed speed display (see
illustration).
Reinstall wrapper.
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Or
Or
Meters/Minute
Inches/Minute
Digital Meter Display
Using arc voltage sensing lead:
Set switches as shown and connect PLG42
and PLG43 in unit wiring harness. PLG41
remains unconnected.
Voltage Sensing Function
1 2
X Means switch position does not affect
specified function.
.
Means switch must be in this position.
2
1
Using 14-pin receptacle voltage feedback:
Set switches as shown and connect PLG42
and PLG41 in unit wiring harness. PLG43
remains unconnected.