OM-212296 Page 24
SECTION 6 − OPERATION
The following is a list of terms and their definitions as they apply to this product.
General Terms:
Sequence
A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
Weld Program
A group of sequences that make up a weld cycle.
6-1.
Power Switch And Buttons
803 448-A
1
Power Switch
2
Start Button
3
Stop Button
4
Inch Up Button
5
Inch Down Button
2
3
1
5
4
6-2.
Program Push Buttons
1
Program Display
The number of the active program
is displayed.
2
Program Push Button
Press button to activate program
selected feature. To change the
program number, press the Pro-
gram push button, or rotate the Ad-
just control.
3
Program Push Button LED
The LED lights to indicate the Pro-
gram push button is active.
3
2
1
Ref. 236 564-B
