Miller DYNASTY 350, Owner'S Manual

Page: 46 / 136

OM-216 869 Page 40
4-21. Cooler Connections
Cart and cooler are optional equip-
ment.
1
AC Duplex Receptacle
2 115 VAC Cord
Provides 115 vac to power cooler.
3
Electrode Weld Output
Terminal ( − Weld Output
Terminal On Maxstar Models)
Connect TIG torch to electrode
weld output terminal.
4
Gas Out Connection
Connect TIG torch gas hose to gas
out fitting.
5
Work Weld Output Terminal
(+Weld Output Terminal On
Maxstar Models)
Connect work lead to work weld
output terminal.
6
Water-Out (To Torch)
Connection
Connect torch water-in (blue) hose
to welding power source water-out
connection.
7
Water-In (From Torch)
Connection
Connect torch water-out (red) hose
to welding power source water-in
connection.
1
Low Conductivity Coolant
No. 043 810**;
Distilled Or Deionized Water
OK Above 32
 F (0  C)
GTAW Or Where
HF* Is Used
Application
*HF: High Frequency Current
**Coolant 043 810, a 50/50 solution, protect to -37

F (-38

C) and resist algae growth.
Coolant
3
4
5
6
7
804 753-B
3-1/2
Gal
2
Tools Needed:
11/16 in. (21 mm for CE units)
NOTICE − Use of any coolant other than those listed in the table voids the warranty
on any parts that come in contact with the coolant (pump, radiator, etc.).