OM-281136 Page 28
5-15. Connecting Heating Tool Cables To Thermocouple Extension Cable Receptacle
Ref. 282490-A
1
ArcReach Heater Extension
Cable
2
Thermocouple Receptacle
3
Heating Tool Connector Socket
4
Heating Tool Connector Plugs
Connect the air-cooled heating cable
or air-cooled quick wrap connector
plugs to the heating tool connector
sockets at the end of the ArcReach
Heater extension cable.
Twist connector clockwise to secure in
place.
4
2
1
3
1 Tool
5-16. Connecting Two Heating Tool Cables To Thermocouple Extension Cable Receptacle
And Series Adaptor
2
1
The quick wrap heating tool can be
used one at a time or in pairs.
A single quick wrap is often used
directly over a joint or on the end of
a pipe.
Two quick wraps can be used to
cover a wider heat zone and to
induce more power into larger
parts.
.
The adapter allows use of two
heating tools.
1
ArcReach Heater Extension
Cable
2
Thermocouple Receptacle
3
First Heating Tool Cables
4
ArcReach Heater Series
Adapter
5
Cable Connection
6
Second Heating Tool Cables
Connect the air-cooled heating
cable or air-cooled quick wrap
connector plugs to the heating tool
connector sockets at the end of
the ArcReach Heater extension
cable.
Twist connectors clockwise to
secure in place. Ref. sec. 5-14 for
proper connections.
4
5
3
6
Ref. 282490-A
Tool 1
Tool 2
