Miller Electric Migmatic 271 Owner'S Manual Download Page 4

Page: 4 / 48

dec_stat_Milan_6/05

Declaration of Conformity for

European Community (CE) Products

This information is provided for units with CE certification (see rating label on unit).

NOTE

Manufacturer

European Contact:

ITW Welding Products Italy S.r.l.

Mr. Danilo Fedolfi,

Via Privata Iseo 6/E

Managing Director

20098 San Giuliano

ITW Welding Products Italy S.r.l.

Milanese, Italy

Via Privata Iseo 6/E

Phone: 39(02)98290-1

20098 San Giuliano

Milanese, Italy

Phone: 39(02)98290-1

Fax: 39(02)98290203

European Contact Signature:

Declares that this product:

Migmatic 271/273/293/333/383

conforms to the following Directives and Standards:

Directives

Electromagnetic Compatibility Directives: 89/336/EEC

Low Voltage: 73/23/EEC

Machinery Directives: 89/392/EEC

And their amendments 91/368/EEC, 92/31/EEC, 93/44/EEC, 93/68/EEC

, 98/37/EC

Standards

Electromagnetic compatibility (EMC) EN50199: August 1995

Safety Requirements for Arc Welding Equipment Part 1: EN 60974-1: 1998

And their amendments EN60974-1:2005, EN60974-10:2003

The product technical file is maintained by the responsible Business Unit(s) located at the manufacturing facility.

Summary of Contents for Migmatic 271

















































Search results

Summary of Contents for Migmatic 271

Reviews:

Related manuals for Migmatic 271

Brands by name

Popular brands

Miller Electric Migmatic 271, Owner'S Manual

Search results

Summary of Contents for Migmatic 271

Reviews:

Related manuals for Migmatic 271

Brands by name

Popular brands